Products

Performs pour, cloud and freeze point in one unit. The 70Xi is available in single shot or with a 48-station autosampler, which allows unattended testing.

A fully automated, Ball-on-Cylinder wear test system which provides a fast, repeatable assessment of the lubricity of aviation fuels.

A fully automatic laboratory instrument for evaluating the scuffing load resistance of diesel (middle distillate) fuel according to ASTM D6078.

Boiling Point Distribution

Boiling Point Distribution – data for naphtha and gasoline in 15 minutes.

Boiling point data from naphtha up to crude oil samples.

Determines trace CO and CO2 in hydrogen and light gaseous hydrocarbons under 5 minutes.

This sampling device is designed for fully automated analysis of gaseous and pressurized liquid hydrocarbon streams for MultiTek and Gas Chromatography applications.

High-power benchtop sequential WDXRF spectrometer

This kit is used to upgrade manuat Tamson viscosity baths (TV4000MKII, TV4000DC, TV2000MKII and OEM baths) to a system with automated viscosity determination. This allows the user to perform automated viscosity determinations, using an existing manual Tamson bath.

High-power benchtop sequential WDXRF spectrometer

Water determination in all types of samples. Flexible, cost-efficient and
easy handling without sample preparation.

Specifically designed for the determination of water content, combining coulometry with the Karl
Fischer method.

designed for an easy and accurate determination of water in liquefied and gaseous samples such as LPG and LNG.

Determination of water in petroleum products, lubricating oils, and additives by coulometric Karl Fischer titration.

Apparatus to determine the density of petroleum products by hydrometer.

Bath with all the accessories to perform tests according to ASTM D1384, which is a corrosion test for engine coolants in glassware. Instrument offers six positions and is delivered with six sets of glassware and six flowmeters.

Bath can be used to heat samples for Phosphorus in Gasoline tests and can hold eight volumetric flasks submerged to the mark. The temperature needed for the test method is between 82.2°C and 87.8°C.

Apparatus is designed for sediment determinations by membrane filtrations in crude oil. Supply with complete apparatus for this test method, including the robust TC16 circulator bath, jacketed funnel, filtered flask, vacuum pump and stand.

Complete apparatus for ASTM D849 tests. The test method covers the detection of the corrosiveness to copper from aromatic hydrocarbons.

Automated instrument designed to test the Filter Blocking Tendency (FBT) of distillate fuels including diesel, biodiesel (B100 & B5/7/20/30), gas oil, gas turbine fuel, and kerosene. It conforms to ASTM D2068 and IP 387.

The patented sample taking system allows making multiple fuels from a fuel tank. It improves the state of the art in sampling representative samples. An important application is sampling from trucks (analysis of diesel oil against heating oil, search for markers. etc.)

All-in-one analyzer: fatty acid methyl esters, diesel fuel and yields.

The Tamson CEC L-109-14 bath is a bath with all the accessories to perform tests according to CEC L-109-14, which is the oxidation test for engine oils operating in the presence of biodiesel fuels.

High-power benchtop sequential WDXRF spectrometer

Specially designed for water and sediment determination, as well as characterization of used oils and petrol features as demulsibility and precipitation.

ROFA offers a wide range of materials for control of analyzers in petroleum laboratories – manufactured and calibrated under strictly controlled conditions,

A unique technology that is proven to provide the best precision in the market for determining the Derived Cetane Number of all types of diesel fuel, biodiesel, FAME, HVO, BTL, and GTL.

Determines the boiling range distribution of Carbon, Nitrogen, and Sulfur in crudes and final products.

High-power benchtop sequential WDXRF spectrometer

A safe and flexible solution to house analytical equipment is our completely customizable Container Laboratory.

The test method covers the detection of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, natural gasoline or other hydrocarbons having a Reid Vapour Pressure no greater than 18 psi. The cover of the bath has six openings, each with a lid and ho

Combines the results of DHA Front End (FE) and High Temp (HT) SIMDIS analyses into one total true boiling point (TBP) report.

For petroleum, petrochemical, and natural gas analysis.

The test method covers the determination of the pour point temperatures of crude oil down to -36°C.

Determines trace thiophene in refined benzene by gas chromatography and sulfur selective detection.

DFA-70Xi analyzer is the world’s first and only instrument that performs four important diesel fuel tests in one single unit—cloud point, pour point, viscosity and density in less than 25 minutes!

Determines individual hydrocarbon composition.

Affordable and fast portable analyzer that is ideal for the simultaneous quantification of dye and color concentrations in diesel fuels and heating oils.

Diesel thermal oxidation tester.

A fully automated, benchtop instrument, measuring lubricant film thickness down to 1nm in the elastohydrodynamic (EHD) lubricating regime.

Total elemental combustion analyzer.

Ball-on-disc instrument for measuring the frictional properties of lubricated and unlubricated contacts under extreme pressures and a wide range of rolling and sliding conditions.

Analyzer determines the content of dispersed mineral oil between n-C7 and n-C40 in water by means of gas chromatography.

Specifically designed for routine analysis by refineries.

Fast Refinery Gas Analyzer separates inert gases and C1-C5 hydocarbons in 20 minutes.

Filtration kit for ASTM D7501

Provides detailed and reliable compositional information on refinery streams.

fast total olefin analysis within 20 minutes.

Fully automated Vacuum Distillation Analyzer, which offers highest flexibility for the user. It can measure samples up to 650C AET.

A ball-on-plate reciprocating friction and wear test system, assessing the performance of both fuels and lubricants under boundary conditions.

Measure evaporation residue in aviation fuels, motor gasolines, and other volatile distillates. HGT 915 uses air evaporation, while the HGT 917 offers the versatility of either air or steam evaporation.

Rafinery gas analyzer – high speed solution.

The high pressure viscosity sensors 440 and 443 are used in various applications including PVT oil research, EOR, core analysis, and supercritical fluid research.

Automatically determines the softening point of bitumen, tar, pitch, tall oil rosins, and polymeric resins via standard ring and ball test methods.

Determines direct kinematic viscosity of transparent and opaque liquids fully automated.

Designed for accurate determination of vapor pressure of both automotive and aviation gasoline, turbine fuels, other light distillate petroleum products, hydrocarbon solvents and chemical compounds.

Offers stability, ease of use, repeatability, and high sample throughput.

Ensures traceable, accurate, and secure jet fuel thermal oxidation testing.

JFA-70Xi jet fuel analyzer is the world’s first and only instrument that performs three crucial tests in one unit—freeze point, viscosity and density.

Jet fuel thermal oxidation tester.

High-power benchtop sequential WDXRF spectrometer

Micro carbon residue tester.

Incorporates the high performance liquid chromatography.

MFA-70Xi analyzer measures cloud point, pour point, viscosity and density of light marine distillate fuels like DMX, DMA, DMZ, and DMB.

Benchtop power X-RAY diffraction (XRD) instrument – qualitative and quantitative phase analysis of poly-crystalline materials

Portable gas chromatograph with internal gas supply.

UNIQUE on the market: our completely customizable Mobile Laboratory!

Triple disc machine for researching rolling contact fatigue (RCF) failure mechanisms in the form of micro and macro pitting under lubricated and unlubricated conditions.

A ball-on-disc instrument for measuring the frictional properties of lubricated and unlubricated contacts under a wide range of rolling and sliding conditions.

Combines testing for sulfur, nitrogen, and halides all in one.

Natural Gas Analyzer.

Natural Gas Analyzer.

Evaporation loss analyzer enables the most precise testing to meet increasing QS/QA requirements in full compliance with CEC, ASTM & IP methods.

Performs pour and/cloud point testing of any petroleum products, down to -95°C (-139°F), in accordance with all international standards.

Atmospheric Distillation.

determines the flash point of petroleum products, biodiesels, solvents, fluxed bitumen, food, and beverages up to 400°C.

accurately detects flash point up to 400°C:

Safe and accurate flash point determination for low volume samples.

Flash point analyzer – accurately detects flashpoints from ‘-30°C to 120°C:

Combines a patented built-in cooling system and highly precise detection mechanism into an ultra-compact, easy to use instrument.

OptiFuel combines the best of our GS PPA, TD PPA and QuickSpec capabilities into one analyzer and adds the latest FTIR technology into the most robust fuel analyzer in the market.

Offers proven technology used by labs worldwide. The powerful internal cooling system can measure up to -100C (-148F) without the need of an external cooling bath.

Provides highly accurate cloud and pour point temperatures of petroleum products during cooling. This automated Mini Cloud Pour Point Analyzer is compact, portable and delivers fast results.

OptiPMD’s method, ASTM D7345, delivers significantly faster results compared to the conventional ASTM D86 method, and it’s now accepted as an alternative to certify Jet A, Jet A-1, and military grades F-34, F37 and F-44 in Canada.

Heater tube scanner.

Ellipsometric jet fuel thermal oxidation heater tube scanner.

Traces oxygenates in light hydrocarbon streams.

Hydrocarbon group type analysis.

Portable QuickSpec analyzer delivers simple, fast, and accurate analysis of ethanol and water in gasoline blends throughout the fuel blending process.

For measuring product temperatures from 0°C to 220°C. The instrument enables simultaneous testing of two samples with independent monitoring.

Full group type analysis of gasoline and gasoline blend.

ROFA’s Blender are automatic controlled by PLC or PC and with or without burettes.
They are available in mode Gravity or in mode Pumps, according to selected Blender model.

Crude Oil Distillation Plants – TBP & Potstill in Standard, L-Series, M-Series.

ROFA works closely with statisticians and industry experts to provide the unique solution for precision determination of measurement methods under ISO and ASTM.

The RSDL (ROFA Serial Data Logger) is a software that reads and processes serial data streams of a number of laboratory analyzers.

Oxidation Stability Tester without use of any liquids!

Test for total sediment in residual fluids.

Sulfur elective detector for gas chromatography.