| Products |
| Records: 10 |
| 9000 SERIES Nitrogen/Sulfur Analyzers |
 | 9000 Series Analyzers use proven technology to perform total nitrogen and/or total sulfur analyses from low ppb to percent levels. Their speed, accuracy, and precision are unrivalled — more stable than coulometric methods, more sensitive than x-ray, safer and faster than Kjeldahl.
Featuring separate detectors for chemiluminescent nitrogen and UV-fluorescent sulfur, the 9000 configures for nitrogen only, sulfur only, or simultaneous nitrogen/sulfur analyses in gas, liquid, and solid samples. This versatility enables you to buy one detector now and add a second later.
These new generation analyzers include a computer with Windows™-based, custom-designed software. Data acquisition, analysis, and storage, as well as programming and control of the analyzer and accessory instrumentation are easy using the user friendly, menu driven interface. Remote instrument operation and real-time analysis support are provided via modem.
|
| >>more ..... |
|
| 9000LLS Low Level Sulfur Analyzer |
| 9000LLS Analyzer uses proven, patented technology to perform low ppb total sulfur analysis. Its speed, accuracy, and precision are unrivalled — more stable than coulometric, more sensitive than x-ray, safer and faster than lead acetate.
9000 Series Analyzers include a data handling system with Windows™-based, custom-designed software. This provides data acquisition, analysis, and storage, as well as programming and control of the analyzer and accessory instrumentation. Remote instrument operation and real-time analysis support are available via pre-configured modem.
|
| >>more ..... |
|
| 6000 SERIES Process/on-line Analyzers |
 | ANTEK’s 6000 Series Analyzers configure for analysis of nitrogen and sulfur. Gases and liquids are analyzed in one to two minutes with the analytical range and analysis time for an individual detector unchanged by the addition of a second detector. |
| >>more ..... |
|
| 6000HSS High Speed Sulfur Process Analyzer |
| |
| >>more ..... |
|
| 6200 SERIES Process Analyzers |
 | Antek's 6200 Series On-Line Sulfur/Nitrogen Analyzers quantitate total sulfur and/or total bound nitrogen in process streams with detection capabilities from 250 ppb to percent levels. These rugged, low maintenance analyzers feature dual-stream and dual-range analyses and offer excellent reproducibility and linearity with a fast analysis time. |
| >>more ..... |
|
| MODEL 9000F Fluoride Analyzer |
 | ANTEK's 9000F offers a cost-effective alternative to the common Wickbold method (oxy-hydrogen torch) of analysis, providing total fluoride determinations on gas, liquid, and solid samples safely within minutes instead of hours. It is far less expensive than ICP/MS; and, unlike other methods, the ANTEK 9000F is specific for fluoride without interference from other halides. The safe, non-hazardous ion specific detection method provides an analytical range from sub-ppm to percent levels.
Complete instrument control and data processing are provided by a data handling system included in the system. Its custom-designed software provides real time results, multi-point calibration, data storage and manipulation. Data is automatically collected and stored for comparison analysis.
Companies world-wide have incorporated the 9000F Fluoride into their laboratories for analyses spanning alkylates, chemicals, paraffins, toothpaste, gases, hair, polymers, acid solutions, catalysts, LPG, and petroleum products, additives, & refinery feedstocks.
|
| >>more ..... |
|
| MODEL 7050 Nitric Oxide Detector |
 | ANTEK's Model 7050 permits fast, sensitive analysis of nitric oxide in gas and liquid samples. Its unique, patented nitric oxide transfer vessel frees analysts of time-consuming sparging with inert gas. The 7050 quantitates nitric oxide in gaseous samples in less than 30 seconds, while direct measurement of NO in liquid samples takes about one minute.
The 7050 is simple to equilibrate, calibrate, and maintain. ANTEK's patented chemiluminescent method is clean, fast, and efficient, requiring only oxygen for operation. By eliminating need for buffers and other reagents, ANTEK's nitric oxide analyzer can be installed in any setting. Typical samples include headspace gases, mixed gases, expired breath, cell media, chemical solutions, and non-bloody tissue homogenates.
|
| >>more ..... |
|
| MODEL 745 Nitrite/Nitrate Reducer |
 | 745 Nitrate/Nitrite Reducer utilizes vanadium (III) to rapidly reduce nitrite and nitrate to nitric oxide (NO). The resulting NO can then be detected and quantitated using ANTEK's Model 7050 Nitric Oxide Analyzer or 9000 Series Nitrogen/Sulfur Analyzers.
Covering a wide dynamic range and unaffected by dilution, the 745 is well suited for large sample sizes and easily handles aqueous or hydrocarbon samples. Durable glassware adds to its simplicity and ease of operation.
The 745 is effectively incorporated into analysis of biological fluids, chemical solutions, tissue bath solutions, wastewater, cell media, petrochemicals, tissue homogenates, and more.
|
| >>more ..... |
|
| Model 1040 On-line Total Hydrocarbon Analyzer |
 | ANTEK’s Model R 1040 Total Hydrocarbon (THC) Analyzer is lightweight and easy to use in the laboratory, on-line/process, or field. It analyzes gas samples in a variety of applications such as air monitoring, specialty gas manufacturing and/or blending, semiconductor manufacturing, or other areas where THC information is needed. |
| >>more ..... |
|
| TQACO2 TOTAL QUALITY ASSURANCE FOR CO2 |
 | The TQACO2 is a complete analyzer package with a single operating data system. Gas suppliers and bulk CO2 users can now generate their own load report to show compliance with your specifications.
|
| >>more ..... |
|
